The World’s First Injection-Molded GA Console
Stop settling for rattling 3D-printed trays or heavy metal boxes that kill your useful load. The Flying Caddy is engineered to silence the cockpit and fit your aircraft perfectly. Tap the points to see the difference.
Shop Now
Market-Exclusive Rubber Grip
The only console on the market with molded rubber inserts. Prevents "Yeti rattle" and secures drinks better than shallow 3D-printed alternatives.
Injection Molded (Not 3D Printed)
Manufactured like OEM aircraft parts, not printed in a garage. Smooth medical-grade PC/ABS finish that won't warp in heat or degrade under UV light.
Optimized Fit & Payload
Engineered to the exact width of the Cessna fuel selector for a seamless look (secured by Velcro). Universal fit for jets and helis. Weighs only ~2.5 lbs (competitors can weigh 20 lbs+).
Finally, a center console that looks like it came from the factory.
Stop throwing your iPad on the floor or jamming your water bottle between the seats. The Flying Caddy is the first injection-molded cockpit organizer engineered specifically for the General Aviation fleet.
Unlike cheap 3D-printed trays that rattle and warp in the heat, the Flying Caddy is built from medical-grade ABS plastic with a matte finish that perfectly matches your interior.
Why Pilots Choose the Flying Caddy:
- Turbulence-Proof Grip: Features removable rubber inserts that lock your drinks in place. Your Yeti tumbler or water bottle won't tip over, even in choppy air.
- The "Silent" Console: No hard plastic rattling agasint hard plastic. The vibration dampening design keeps your cockpit quiet.
-
Massive Capacity: Specifically sized to hold:
- 1x Large Drink (Yeti 20oz/30oz compatible)
- 1x Standard Water Bottle
- iPad Mini, iPad, or Other Device
- Smartphones, pens, notepads, other items
- Universal Cessna Fit: Fits perfectly in most Cessna 172, 182, 206, and 210. (Also fits many other models with flat floors).
- Secure Installation: Anchors firmly to your cockpit vinyl or carpet using the included heavy-duty Velcro strips. It stays planted during takeoff, landing, and steep turns.
- Dimensions: 10" L x 5" W x 6" H
- Pilot Designed: Designed in Louisiana by real pilots for real flight conditions.
Installs in seconds. No tools required.
Requires a flat floor with 5 inches of width clearance
Will It Fit My Aircraft?
Guaranteed Fit ✅
Cessna 172 Skyhawk (1965–Present)
Fits Models F, G, H, I, K, L, M, N, P, Q, R, S.
(Note: Must have electric flaps on panel)
Cessna 182 Skylane (1962–Present)
Fits Models E, F, G, H, J, K, L, M, N, P, Q, R, S, T.
(Note: Must have electric flaps)
Cessna 206 Stationair (All Years)
Fits all U206 and P206 models with flat floors.
Cessna 210 Centurion (All Years)
Fits 210 through 210R.
Robinson Helicopters
R44 & R66 (Rear Seat Console).
⚠️ Test Pilot Program
Fly something else? Get 50% Off.
If it fits, send us a photo for a 50% Refund.
Beechcraft Bonanza
Models 33, 35, 36 (Check for spar hump).
Beechcraft Baron
Models 55 & 58.
Piper Comanche
PA-24 & PA-30.
Grumman Series
AA-5 Traveler, Cheetah, Tiger.
Trucks / RVs / Boats
Any flat carpeted surface (10" x 5").
❌ Will NOT Fit
Do NOT buy for these models.
Manual Flap Cessnas (Floor Lever)
Cessna 172 Models A–E (1956–1964).
Cessna 182 Models A–D (1956–1961).
Cessna 180 & 185 Skywagon (All).
Cessna Caravan (208)
Center pedestal obstruction.
Piper PA-28 Series
Cherokee, Warrior, Archer, Arrow (Manual flap lever obstruction).
Mooney M20
Center spar hump obstruction.
The Standard:
We believe a cockpit organizer shouldn't look like a science fair project. Many aftermarket options are 3D-printed, resulting in rough "layer lines" and a textured finish that clashes with a professional interior.
The Flying Caddy Solution:
We utilize Injection Molding to achieve a seamless, single-piece unit. This process creates a smooth, matte finish that blends perfectly with the pedestal and interior trim of your Cessna or Beechcraft. It looks like an OEM part, not a rough add-on.
The Standard:
A cup holder is useless if it’s shallow or loose. In choppy air, you need to know your coffee is locked in.
The Flying Caddy Solution:
We engineered our cupholders to be extra deep with a friction-fit design. Featuring removable rubber inserts, the console is specifically sized to hold a standard Yeti tumbler perfectly tight just like the cup holders in a Ford truck. Your drink stays vertical and secure during takeoff, landing, and steep turns.
The Standard:
Cockpits are greenhouses. Generic 3D-printed units are often made of PLA plastic, which has a low melting point. Leaving your plane on a hot ramp in July can cause these units to warp, melt, or deform.
The Flying Caddy Solution:
We construct every unit from high-grade, industrial polymers specifically chosen for their heat deflection properties. The Flying Caddy is built to withstand the extreme greenhouse temperatures of a closed cabin without losing its shape or finish.
The Standard:
We believe that upgrading your cockpit shouldn't require a "luxury tax."
The Flying Caddy Solution:
By leveraging modern manufacturing efficiency, we are able to produce a console that meets the highest standards of durability and finish without the traditional aviation markup. We provide the premium utility of the top-tier legacy brands at a price point that makes sense for the general aviation owner.
Testimonials
Mike G.
Cessna 172 Owner
Flew home from Oshkosh yesterday and the caddy worked well on the trip home. We were able to keep our water bottles within easy reach, as well as store a notepad and phone. Functionally, it is just what we were looking for.
Mindy
Cessna 182 Owner
Thank you so much for the console for our 182... It is awesome!!! The fit is perfect. We hardly ever have passengers in the back, so it works great behind our front seats.
Jeff T.
Cessna 182 Owner
Works great! That caddy is a game changer.